Cisco ESW 500 - Page 244

Configuring IP Information
Defining DHCP Relay
ESW 500 Series Switches Administration Guide 233
8
STEP 1 Click Monitor & Device Properties > System Management > IP Addressing >
DHCP Relay > DHCP Server. The
DHCP Server Page opens:
DHCP Server Page
The
DHCP Server Page Server contains the following fields:
• DHCP Relay — Enable or disable DHCP Server on the device. The possible
values are:
- Enable — Enables DHCP Relay on the device.
- Disable — Disables DHCP Relay on the device.
• Option 82 — Indicates if Option 82 is enabled for DHCP. The possible values
are:
- Enable — Enables Option 82 for DHCP.
- Disable — Disables Option 82 for DHCP.
• DHCP Server — Display the IP address of the DHCP server.
STEP 2 Click the Add button. The Add DHCP Server Page opens: