Getting Started
Performing Common Configuration Tasks
ESW 500 Series Switches Administration Guide 35
1
Resetting the Device
The Restart / Reset Page enables the device to be reset from a remote location.
Save all changes to the Running Configuration file before resetting the device by
clicking on Maintenance > File Management > Save Configuration. Define the
relevant fields and then click Apply. This prevents losing the current device
configuration.
To reset the device:
STEP 1 Click Monitor & Device Properties > System Management > Restart / Reset. The
Restart / Reset Page opens.
Restart / Reset Page
STEP 2 Click one of the available Reset commands:
• Reset / Reboot — Resets the device. Ensure the device configuration has
been saved.
• Restore Default — Restores the device to the factory default configuration.
STEP 3 After the switch has completed rebooting and is up and running, relaunch the
Switch Configuration Utility and log back into the switch.
To Next Page
Loading...
