Cisco ESW 500 - Modifying MAC Based ACL

Configuring Device Security
Defining Access Control
ESW 500 Series Switches Administration Guide 155
5
STEP 4 Define the relevant fields.
STEP 5 Click Apply. The ACL Rule is defined, and the device is updated.
Modifying MAC Based ACL
STEP 1 Click Security > Access Control Lists (ACL) > MAC Based ACL. The MAC Based
ACL Page
opens.
STEP 2 Click the Edit button. The Rule Settings Page opens:
Rule Settings Page
The
Rule Settings Page contains the following fields:
• ACL Name — Displays the user-defined MAC based ACLs.
• Rule Priority — Indicates the rule priority, which determines which rule is
matched to a packet on a first-match basis.
• Source MAC Address:
- MAC Addres s — Matches the source MAC address from which packets
are addressed to the ACE.