Cisco ESW 500 - Default Parameters

Configuring IP Information
Domain Name System
ESW 500 Series Switches Administration Guide 241
8
STEP 1 Click Monitor & Device Properties > System Management > Domain Name System
(DNS) > DNS Servers. The
DNS Servers Page opens:
DNS Servers Page
The
DNS Servers Page contains the following fields.
• Enable DNS — Enables translating the DNS names into IP addresses. The
possible field values are:
- Checked — Translates the domains into IP addresses.
- Unchecked — Disables translating domains into IP addresses.
Default Parameters
• Default Domain Name — Specifies the user-defined DNS server name (1 -158
characters).
• Type — Displays the IP address type. The possible field values are:
- DHCP — The IP address is dynamically created.
- Static — The IP address is a static IP address.
• Remove — Removes DNS servers. The possible field values are: