Cisco ESW 500 - Configuring Smart Ports for Access Points

Managing Smart Ports
Configuring Smart Ports for Access Points
ESW 500 Series Switches Administration Guide 69
3
Configuring Smart Ports for Access Points
The Smart Ports for Access Points Page allows network administrators to manage
the connection between the switch and wireless access points. To configure
smart ports for access points:
STEP 1 Open the Switch Configuration Utility. The web application automatically opens
to the
System Dashboard Page .
STEP 2 Click Smart Ports Wizard under Ports on the System Dashboard Page . The Smart
Ports Setting
Page opens:
Smart Ports Setting Page
STEP 3 Select a port or range of ports.
STEP 4 Select Access Points in the Assign Profile drop-down list.
STEP 5 Click Next. The Smart Ports Access Point Settings Page opens:.