Configuring Spanning Tree
Defining Multiple Spanning Tree
ESW 500 Series Switches Administration Guide 279
11
• Defining MSTP Interface Settings
Defining MSTP Properties
The
MSTP Properties Page
contains information for defining global MSTP
settings, including region names, MSTP revisions, and maximum hops.
To d e f i n e M S T P :
STEP 1 Click VLAN & Port Settings > Spanning Tree (STP) > MSTP > Properties. The
MSTP Properties Page
opens:
MSTP Properties Page
The
MSTP Properties Page
contains the following fields:
• Region Name — Provides a user-defined STP region name.
• Revision — Defines unsigned 16-bit number that identifies the revision of the
current MST configuration. The revision number is required as part of the MST
configuration. The possible field range 0-65535.
• Max Hops — Indicates the total number of hops that occur in a specific region
before the BPDU is discarded. Once the BPDU is discarded, the port
To Next Page
Loading...
