Cisco ESW 500 - Defining SNTP Authentication

Configuring System Time
Defining SNTP Authentication
ESW 500 Series Switches Administration Guide 94
4
Add SNTP Server Page
The
Add SNTP Server Page contains the following fields:
• SNTP Server — The SNTP server’s IP address.
• Enable Poll Interval — Select whether or not the device polls the selected
SNTP server for system time information.
• Encryption Key ID — Select if Key Identification is used to communicate
between the SNTP server and device. The range is 1 - 4294967295.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The SNTP Server is added, and the device is updated.
Defining SNTP Authentication
The SNTP Authentication Page provides parameters for performing authentication
of the SNTP server.