Cisco ESW 500 - Defining SNMP Views

Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide 335
13
STEP 3 Click Apply. The SNMP Engine ID is defined, and the device is updated.
Defining SNMP Views
SNMP Views provide access or block access to device features or feature
aspects. For example, a view displays that the SNMP Group A has Read Only (R/
O) access to Multicast groups, while SNMP Group B has Read-Write (R/W) access
to Multicast groups. Feature access is granted via the MIB name, or MIB Object ID.
To define SNMP views:
STEP 1 Click Monitor & Device Properties > SNMP > Security > Views. The SNMP
Views Page
opens:
SNMP Views Page
The
SNMP Views Page contains the following fields:
• View Name — Displays the user-defined views. The options are as follows:
- Default — Displays the default SNMP view for read and read/write
views.
- DefaultSuper — Displays the default SNMP view for administrator
views.