Cisco ESW 500 - Page 143

Configuring Device Security
Defining Traffic Control
ESW 500 Series Switches Administration Guide 132
5
STEP 1 Click Security > Traffic Control > Port Security. The Port Security Page opens:
Port Security Page
The
Port Security Page contains the following fields:
• Ports Radio Button — Indicates the Port on which port security is configured.
• EtherChannels Radio Button — Indicates the EtherChannel on which port
security is configured.
• Interface — Displays the port or EtherChannel name.
• Interface Status — Indicates the port security status. The possible field values
are:
- Unlocked — Indicates the port is currently unlocked. This is the default
value.
- Locked — Indicates the port is currently locked.
• Learning Mode — Defines the locked port type. The Learning Mode field is
enabled only if Locked is selected in the Interface Status field. In order to
change the Learning Mode, the Lock Interface must be set to Unlocked. Once
the mode is changed, the Lock Interface can be reinstated.The possible field
values are: