Cisco ESW 500 - Page 150

Configuring Device Security
Defining 802.1x
ESW 500 Series Switches Administration Guide 139
5
STEP 1 Click Security > 802.1X > Port Authentication. The 802.1X Port Authentication
Page
opens:
802.1X Port Authentication Page
The
802.1X Port Authentication Page contains the following fields:
• Copy From Entry Number — Copies the port authentication configuration from
the specified table entry.
• To Entry Number(s) — Assigns the copied port authentication configuration to
the specified table entry.
• Port — Displays the list of interfaces.
• User Name — Displays the user name.
• Current Port Control — Displays the current port authorization state.
• Guest VLAN — Displays the Guest VLAN.
• Authentication Method — Displays the authentication method in use. The
possible field values are:
- 802.1x Only — Enables only 802.1x authentication on the device.
- MAC Only — Enables only MAC Authentication on the device.