Configuring Device Security
Defining Access Control
ESW 500 Series Switches Administration Guide 151
5
• 802.1p Mask — Displays the wildcard bits to be applied to the CoS.
• Ethertype — Displays the Ethernet type of the packet.
• Action — Indicates the ACL forwarding action. For example, the port can be
shut down, a trap can be sent to the network administrator, or packet is
assigned rate limiting restrictions for forwarding. Possible field values are:
-
Permit
— Forwards packets which meet the ACL criteria.
-
Deny
— Drops packets which meet the ACL criteria.
-
Shutdown
— Drops packet that meet the ACL criteria, and disables the
port to which the packet was addressed. Ports are reactivated from the
Edit Interface Settings Page.
STEP 2 Click the Add ACL button. The
Add MAC Based ACL Page
opens:
Add MAC Based ACL Page
The
Add MAC Based ACL Page
contains the following fields:
• ACL Name — Displays the user-defined MAC based ACLs.
• New Rule Priority — Indicates the ACE priority, which determines which ACE is
matched to a packet on a first-match basis. The possible field values are 1-
2147483647.
• Source MAC Address:
To Next Page