Cisco ESW 500 - Page 182

Configuring Device Security
Defining DoS Prevention
ESW 500 Series Switches Administration Guide 171
5
STEP 1 Click Security > DoS Prevention > Global Settings. The Global Settings Page
opens:
Global Settings Page
The
Global Settings Page contains the following fields:
• Security Suite Status — Indicates if DoS security is enabled on the device. The
possible field values are:
• Enable — Enables DoS security.
• Disable — Disables DoS security on the device. This is the default value.
• Denial of Service Protection — Indicates if any of the services listed below are
enabled. If the service protection is disabled, the
Stacheldraht Distribution ,
Invasor Trojan , and Back Orifice Trojan fields are disabled.
• Stacheldraht Distribution — Discards TCP packets with source TCP port equal
to 16660
• Invasor Trojan — Discards TCP packets with destination TCP port equal to
2140 and source TCP port equal to 1024.