Configuring Device Security
Defining DHCP Snooping
ESW 500 Series Switches Administration Guide 185
5
STEP 1 Click Security > DHCP Snooping > IP Source Guard > Properties. The
IP Source
Guard Properties Page
opens:
IP Source Guard Properties Page
The
IP Source Guard Properties Page
contains the following fields:
• IP Source Guard Status — Enables the use of IP Source Guard status on the
device.
-
Enable
— Indicates that IP Source Guard is enabled for the device.
-
Disable
— Indicates that IP Source Guard is disabled for the device.
STEP 2 Enable or Disable use of IP Source Guard on the device.
STEP 3 Click Apply. The IP Source Guard configuration is modified, and the device is
updated.
To Next Page
Loading...
