Configuring Device Security
Defining DHCP Snooping
ESW 500 Series Switches Administration Guide 187
5
STEP 1 Click Security > DHCP Snooping > IP Source Guard > Interface Settings. The
IP
Source Guard Interface Settings Page
opens:
IP Source Guard Interface Settings Page
The
IP Source Guard Interface Settings Page
contains the following radio buttons
and fields:
• Ports — Displays the port on which the IP source guard is enabled.
• EtherChannels — Displays the EtherChannels on which the IP source guard is
enabled.
• Interface — Indicates the port’s or EtherChannel’s number.
• Status — Indicates if IP Source Guard is enabled or disabled.
-
Enable
— Indicates that IP Source Guard is enabled on the interface.
-
Disable
— Indicates that IP Source Guard is disabled on the interface.
This is the default value.
STEP 2 Click Edit. The
Edit Interface Settings Page
opens:
To Next Page
Loading...
