Configuring VLANs
Assigning Ports to Multiple VLANs
ESW 500 Series Switches Administration Guide 216
7
STEP 1 Click VLAN & Port Settings > VLAN Management > VLAN to Port. The
VLAN To
Port Page
opens:
VLAN To Port Page
The
VLAN To Port Page
contains the following fields:
• Ports — Indicates that ports are described in the page.
• EtherChannels — Indicates that EtherChannels are described in the page.
• Port — Displays the port number.
• Mode — Indicates the port mode. The possible values are:
-
General
— Indicates the port belongs to VLANs, and each VLAN is user-
defined as tagged or untagged (full IEEE802.1q mode).
-
Access —
Indicates a port belongs to a single untagged VLAN.
-
Trunk —
Indicates the port belongs to VLANs in which all VLANs are
tagged, except for one VLAN that is untagged.
-
Customer —
The port belongs to a VLAN in which all ports are untagged.
To Next Page
Loading...
