Cisco ESW 500 - Page 235

Configuring VLANs
Defining GVRP Settings
ESW 500 Series Switches Administration Guide 224
7
Edit GVRP Page
The
Edit GVRP Page contains the following fields:
• Interface — Port or EtherChannel described by the GVRP settings entry.
• GVRP State — Indicates if GVRP is enabled on the interface. The possible field
values are:
- Enable — Enables GVRP on the selected interface.
- Disable — Disables GVRP on the selected interface.
• Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on
the interface. The possible field values are:
- Enable — Enables Dynamic VLAN creation on the interface.
- Disable — Disables Dynamic VLAN creation on the interface.
• GVRP Registration — Indicates if VLAN registration through GVRP is enabled
on the device. The possible field values are:
- Enable — Enables GVRP registration on the device.
- Disable — Disables GVRP registration on the device.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. GVRP settings are modified, and the device is updated.