Cisco ESW 500 - Page 270

Configuring Multicast Forwarding
Defining Multicast Forwarding
ESW 500 Series Switches Administration Guide 259
10
STEP 1 Click VLAN & Port Settings > Multicast > Forward. The Multicast Forward Page
opens:
Multicast Forward Page
The
Multicast Forward Page contains the following fields:
• VLAN ID — Displays the VLAN ID.
• Ports — Displays the Multicast Forwarding ports’ status.
• EtherChannels — Displays the Multicast Forwarding status of all of the device’s
EtherChannels.
• Interface — Indicates the port or EtherChannel whose Multicast forwarding
configuration is described.
• Interface Status — Displays the interface status. The options are as follows:
- Static — Attaches the port to the Multicast group as static member.
- Forbidden — Forbidden ports are not included the Multicast group, even
if IGMP snooping designated the port to join a Multicast group.
- Excluded — The port is not part of a Multicast group.