Cisco ESW 500 - Page 273

Configuring Multicast Forwarding
Defining Unregistered Multicast Settings
ESW 500 Series Switches Administration Guide 262
10
STEP 1 Click VLAN & Port Settings > Multicast > Unregistered Multicast. The
Unregistered Multicast Page opens:
Unregistered Multicast Page
The Unregistered Multicast Page contains the following fields:
• Ports — Indicates the port for which the unregistered Multicast parameters are
displayed.
• EtherChannels — Specifies the EtherChannel for which the Unregistered
Multicast settings are displayed.
• Interface — Displays the interface ID.
• Unregistered Multicast — Indicates the forwarding status of the selected
interface. The possible values are:
- Forwarding — Enables forwarding of Unregistered Multicast frames to
the selected VLAN interface. This is the default setting.
- Filtering — Enables filtering of Unregistered Multicast frames to the
selected VLAN interface.
STEP 2 Click Edit. The Edit Unregistered Multicast Page opens: