Configuring Spanning Tree
Defining Multiple Spanning Tree
ESW 500 Series Switches Administration Guide 281
11
STEP 1 Click VLAN & Port Settings > Spanning Tree (STP) > MSTP > Instance to VLAN.
The
Instance to VLAN Page
opens:
Instance to VLAN Page
The
Instance to VLAN Page
contains the following fields:
• VLAN — Indicates the VLAN for which the MSTP instance ID is defined.
• Instance ID (0-15) — Indicates the MSTP instance ID assigned to the VLAN. The
possible field range is 0-15.
STEP 2 Map the VLANs to Instance IDs.
STEP 3 Click Apply. The MSTP VLAN mapping is defined, and the device is updated.
To Next Page
Loading...
