Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 317
12
-
AND
— Both the ACL 1 and the IP-based ACL 2 must match a packet.
-
OR
— Either the ACL 1 or the ACL 2 must match a packet.
• ACL 2 — Contains a list of the user-defined ACLs.
STEP 2 Click the Add button. The
Add QoS Class Map Page
opens:
Add QoS Class Map Page
The
Add QoS Class Map Page
contains the following fields.
• Class Map Name — Defines a new Class Map name
• IP ACL — Matches packets to IP based ACLs first, then matches packets to
MAC based ACLs.
• Match — Criteria used to match IP addresses and /or MAC addresses with an
ACL’s address.The possible field values are:
-
AND
— Both the MAC-based and the IP-based ACL must match a
packet.
-
O
R — Either the MAC-based or the IP-based ACL must match a packet.
• MAC ACL — Matches packets to MAC based ACLs first, then matches packets
to IP based ACLs.
• Preferred ACL — Defines if packets are first matched to an IP based ACL or a
MAC based ACL. The possible field values are:
-
IP Based ACLs
— Matches packets to IP based ACLs first, then matches
packets to MAC based ACLs.
To Next Page
Loading...
