Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 319
12
STEP 1 Click Quality of Service > Advanced Mode > Aggregate Policer. The
Aggregate
Policer Page
opens:
Aggregate Policer Page
The
Aggregate Policer Page
contains the following fields.
• Aggregate Policer Name — Specifies the Aggregate Policer Name
• Ingress CIR — Defines the Committed Information Rate (CIR) in Kbits per
second.
• Ingress CbS — Defines the Committed Burst Size (CbS) in bytes per second.
• Exceed Action — Action assigned to incoming packets exceeding the CIR.
Possible values are:
-
Drop
— Drops packets exceeding the defined CIR value.
-
Remark DSCP
—Remarks packet’s DSCP values exceeding the defined
CIR value.
-
None
— Forwards packets exceeding the defined CIR value.
STEP 2 Click the Add button. The
Add QoS Aggregate Policer Page opens:
To Next Page
Loading...
