Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide 345
13
To define SNMP Communities:
STEP 1 Click Monitor & Device Properties > SNMP > Security > Communities. The
SNMP Communities Page
opens:
SNMP Communities Page
The
SNMP Communities Page
is divided into the following tables:
• Basic Table
• Advanced Table
The SNMP Communities Basic Table area contains the following fields:
• Management Station — Displays the management station IP address for which
the basic SNMP community is defined.
• Community String — Displays the password used to authenticate the
management station to the device.
• Access Mode — Displays the access rights of the community.
• View Name — Displays the SNMP view.
The SNMP Communities Advanced Table area contains the following fields:
To Next Page
Loading...
