Configuring SNMP
Defining Trap Management
ESW 500 Series Switches Administration Guide 355
13
Edit SNMP Notification Recipient Page
The
Edit SNMP Notification Recipient Page
contains the following fields:
• Recipient IP Address — Indicates the IP address to whom the traps are sent.
• Notification Type — Defines the notification sent. The possible field values are:
-
Trap
— Indicates traps are sent.
-
Inform
— Indicates informs are sent.
Either SNMPv1,2 or SNMPv3 may be used as the version of traps, with only one
version enabled at a single time. The SNMPv1,2 Notification Recipient area
contains the following fields:
• SNMPv1,2 — Enables SNMPv1,2 as the Notification version. If SNMPv1,2 is
enabled, the Community String and Notification Version fields are enabled for
configuration:
• Community String — (SNMP v1, 2) Identifies the community string of the trap
manager.
• Notification Version — (SNMP v1, 2) Determines the trap type. The possible
field values are:
To Next Page
Loading...
