Configuring SNMP
Defining Trap Management
ESW 500 Series Switches Administration Guide 357
13
STEP 1 Click Monitor & Device Properties > SNMP > Trap Management > Filter Settings.
The
Filter Settings Page
opens:
Filter Settings Page
The
Filter Settings Page
contains the following fields:
• Filter Name — Contains a list of user-defined notification filters.
• Object ID Subtree — Displays the OID for which notifications are sent or
blocked. If a filter is attached to an OID, traps or informs are generated and sent
to the trap recipients.
• Filter Type — Indicates whether informs or traps are sent regarding the OID to
the trap recipients.
-
Excluded
— Restricts sending OID traps or informs.
-
Included
— Sends OID traps or informs.
STEP 2 Click the Add button. The
Add SNMP Notification Filter Page
opens:
To Next Page
Loading...
