Configuring SNMP
Managing Cisco Discovery Protocol
ESW 500 Series Switches Administration Guide 361
13
STEP 1 Click Monitor & Device Properties > CDP. The
CDP Page
opens
STEP 2 Click Details. The
CDP Neighbor Details Page
opens:
CDP Neighbor Details Page
In addition to the fields in the
CDP Page
, the
CDP Neighbor Details Page
contains
the following additional fields:
• IP Address — Indicates the address TLV advertised by the neighboring port.
• Interface — Indicates the interface type advertised by the neighboring port.
The possible field values are:
-
Ethernet
— Indicates the neighboring interface is an Ethernet port.
-
Fast Ethernet
— Indicates the neighboring interface is an Fast Ethernet
port.
-
Giga Ethernet
— Indicates the neighboring interface is an Giga Ethernet
port.
• Port ID (outgoing port) — Indicates the neighboring device’s port from which
the CDP packet was sent.
• Version — Indicates the software version installed on the neighboring device.
To Next Page
Loading...
