Cisco ESW 500 - Defining PoE Settings

Managing Power-over-Ethernet Devices
Defining PoE Settings
ESW 500 Series Switches Administration Guide 372
15
STEP 1 Click VLAN & Port Settings > Port Management > PoE Settings. The PoE Settings
Page
opens:
PoE Settings Page
The
PoE Settings Page displays the currently configured PoE ports and contains
the following information:
• Total PoE Power Consumption (W) — Displays the total amount of power
consumed by PoE ports.
• Total PoE Power Available (W) — Displays the total amount of power available
to PoE ports.
• Port — Displays the selected port number.
• Admin Status — Indicates whether PoE is enabled or disabled on the port. The
possible values are:
- Enable — Enables PoE on the port. This is the default setting.
- Disable — Disables PoE on the port.