Cisco ESW 500 - Page 387

Managing System Logs
Enabling System Logs
ESW 500 Series Switches Administration Guide 376
16
STEP 1 Click Maintenance > System Logging > System Messages Settings. The System
Messages Settings Page
opens.
System Messages Settings Page
The
System Messages Settings Page contains the following fields:
• Enable Logging — Indicates if message logging is enabled globally in the
device.
• Severity — The following are the available severity levels:
- Emergency —The system is not functioning.
- Alert — The system needs immediate attention.
- Critical — The system is in a critical state.
- Error — A system error has occurred.
- Warning — A system warning has occurred.
- Notice — The system is functioning properly, but system notice has
occurred.
- Informational — Provides device information.