Aggregating Ports
Defining EtherChannel Management
ESW 500 Series Switches Administration Guide 415
18
• Link State — Displays the link operational status.
• Member — Displays the ports configured to the EtherChannel.
Modifying LAG Membership
STEP 1 Click VLAN & Port Settings > Port Management > EtherChannel Management. The
EtherChannel Management Page
opens:
STEP 2 Click the Edit button. The
Edit EtherChannel Management Page
opens:
Edit EtherChannel Management Page
The
Edit EtherChannel Management Page
contains the following fields.
• EtherChannel — Displays the EtherChannel number.
• EtherChannel Name — Displays the EtherChannel name.
• LACP — Indicates that LACP is enable on the EtherChannel. The possible field
values are:
- Checked — Enables LACP on the EtherChannel.
- Unchecked — Disables LACP on the EtherChannel. This is the default
value.
To Next Page
Loading...
