Aggregating Ports
Defining EtherChannel Settings
ESW 500 Series Switches Administration Guide 419
18
• EtherChannel — Displays the EtherChannel ID number.
• Description — Displays the user-defined port name.
• EtherChannel Type — Indicates he port types that comprise the EtherChannel.
• Admin Status — Enables or disables traffic forwarding through the selected
EtherChannel.
• Current EtherChannel Status — Indicates if the EtherChannel is currently
operating.
• Reactivate Suspended EtherChannel — Reactivates a port if the EtherChannel
has been disabled through the locked port security option or through Access
Control List configurations.
• Operational Status — Indicates whether the EtherChannel is currently
operational or non-operational.
• Admin Auto Negotiation — Enables or disables Auto Negotiation on the
EtherChannel. Auto-negotiation is a protocol between two link partners that
enables a EtherChannel to advertise its transmission rate, and flow control (the
flow control default is disabled) abilities to its partner.
• Current Auto Negotiation — Displays the current Auto Negotiation setting.
• Admin Advertisement — Specifies the capabilities to be advertised by the
EtherChannel. The possible field values are:
-
Max Capability
— Indicates that all EtherChannel speeds and Duplex
mode settings can be accepted.
-
10 Half
— Indicates that the EtherChannel is advertising a 10 Mbps
speed and half Duplex mode setting.
-
10 Full
— Indicates that the EtherChannel is advertising a 10 Mbps
speed and full Duplex mode setting.
-
100 Half
— Indicates that the EtherChannel is advertising a 100 Mbps
speed and half Duplex mode setting.
-
100 Full
— Indicates that the EtherChannel is advertising a 100 Mbps
speed and full Duplex mode setting.
-
1000 Full
— Indicates that the EtherChannel is advertising a 1000 Mbps
speed and full Duplex mode setting.
• Current Advertisement — Indicates the admin advertisement status. The
EtherChannel advertises its capabilities to its neighbor EtherChannel to start
To Next Page
Loading...
