Managing Device Information
Viewing Device Health
ESW 500 Series Switches Administration Guide 52
2
STEP 1 Click Monitor & Device Properties > System Management > Health. The
Health
Page
opens:
Health Page
The
Health Page
contains the following fields:
• Power Supply Status — Displays the power supply status. Power supply 1 is
displayed as PS in the interface, while the redundant power supply is
displayed as RPS. The possible field values are:
-
OK —
Indicates the power supply is operating normally.
-
Fail —
Indicates the power supply is not operating normally.
-
Not Present —
Indicates a redundant power supply is not connected.
• Fan Status — Displays the fan status. The device has five fans. Each fan is
denoted as fan plus the fan number. The possible field values are:
-
OK —
Indicates the fan is operating normally.
-
Fail —
Indicates the fan is not operating normally.
To Next Page
Loading...
