Managing Smart Ports
Configuring Smart Ports for Other
ESW 500 Series Switches Administration Guide 86
3
For more information on configuring SPAN (Port Mirroring), see Chapter 19,
Managing Device Diagnostics.
To remove any previous Smart Ports configuration from a port, configure smart
ports for other:
STEP 1 Open the Switch Configuration Utility. The web application automatically opens
to the
System Dashboard Page
.
STEP 2 Click Smart Ports Wizard under Ports on the
System Dashboard Page
. The
Smart
Ports Setting
Page opens:
Smart Ports Settings Page
STEP 3 Select a port or range of ports.
STEP 4 Select Other in the
Assign Profile
drop-down list.
STEP 5 Click Next, the Other page opens.
To Next Page
Loading...
