141
6.5 Adjustment of the pressure clamps
Stab injury!
In the case of an incorrect handling of the welding torch during the wire
feeding process, the wire transport may cause stab injuries on hand, eyes
or the face.
• During the wire feeding, you should always keep the welding torch in
a position turned away from the body!
Risk of electric shock
If unrestricted access to the live single parts of the QINEO Wire Drive is
possible, all persons must exercise caution to prevent electric shock or risks
of electrical energy.
• Only trained specialists may work on the device.
WARNING!
WARNING!
2
1
½ rotation
4
3
5
The welding wire must not be
deformed.
INFO!
To Next Page
Loading...
