Cloos QINEO - Data Set Switching 1;2

To Next Page

To Previous Page

MAIN - Measured values

Use the arrow keys to switch between the individual input points. After

entering the data you can quit the menu by means of the "Esc" key.

For orientation purposes please find below some welding wire weights.

These weights may vary in practice and have to be checked by means of a

precision balance for an exact determination of the weight.

The weight specifications refer to 1 m welding wire.

Steel solid wire (1 m)

0.8 mm 4.0 g

1.0 mm 6.2 g

1.2 mm 8.9 g

1.6 mm 15.8 g

Aluminium solid wire (1 m)

1.0 mm 2.1 g

1.2 mm 3.1 g

1.6 mm 5.4 g

CuSi solid wire (1 m)

1.0 mm 6.7 g

1.2 mm 9.6 g

1.6 mm 17.1 g

Steel ﬂux-cored wire (1 m)

Metal powder

1.2 mm 8.4 g

1.6 mm 15.0 g

Rutile

1.2 mm 7.2 g

1.6 mm 12.8 g

Alkaline

1.2 mm 7.5 g

1.6 mm 13.3 g

8.1.1 Data set switching 1/2

This function enables you to show the consumption data in two separate

displays. In one of the displays you can determine long-term consump-

tion periods while in the second display you can observe at the same time

shorter periods - e.g. a weld seam. You can switch between views 1 and 2

using the "Data set switching 1/2" function.

Related product manuals