Cloos QINEO - Job Programming QINEO Welding Power Sources; Select Operating Mode Tandem

172
3.4 Job programming QINEO welding power sources
3.4.1 Select operating mode "Tandem"
At the Master machine, and only there, different operating modes can be
selected for the Tandem process.
INFO!
Synergie
Betr.
Verfahren
Funktion
M A I N
Program-
mieren
Messwerte
Anzeige

Puls 4 -Takt
Dyn.
8.5 m / min
-2
4
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
C - Start
Blechdicke 8.5 mm
ASet 230 A
VSet 27.9 V
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
P R O G R A M M I E R E N
Startleistung
Dyn.
6.0 m/min
- 0 -
6
2
Stell-
bereich
Tandem
Aktiver
QWD
Expert
Mode
Impuls-
Sync.