Cloos QINEO - Config - User Management - User Overview - PAK

90
MAIN (2) - Config (Configuration)
10.6.2.3 Config - User management - User overview - PAK
A PAK can only save one user profile.
If you save another user on an already allocated PAK, the first user will get
lost.
You can save the created/selected users to a PAK using the "Program PAK"
function.
MAIN
If a PAK is assigned to a user, the user can log on to the welding power
source with the PAK. Only the functions which are released for this user are
available.
INFO!
Figure 47. PAK Programming
PAK
AUFSETZEN
PAK – Programmierung
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Figure 48. MAIN
Konfig
Diagnose
Sprache
M A I N (2)
Daten
sicherung
Anmelden
Abmelden

Puls 4 -Takt
Konfigurator
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Aktueller Bedienlevel:

Aktueller Bediener:
Mustermann