35
PREMIUM operating module
The PREMIUM operating module is equipped with a LCD
display and offers comfortable and extensive possibilities
to display and change all possible functions of the power
source.
The DuoPulse function can be selected with the Premium
operating module. This function enables to generate a 2nd
parameter set. Then it is possible to constantly change
between the two parameter sets with a defined frequency.
It is possible to correct the arc length, dynamics, wire inching
speed, gas preflow, gas postflow, start time, start power, Up-
Slope, Down-Slope, end time, end power and wire burnback.
The power unit is an air-cooled pulsed chopper (MOSFET
switching control unit).
Optionally, a remote control can be connected.
To Next Page
Loading...
