Control Station Duetto Appendix – Examples
2.0/0518 141
Add a new logic rule for SIP and Intercom mode each (if available). With this logic rule, the display
of the DUETTO device is locked after cancelling a SIP or Intercom call. See the following screenshot:
Display is locked automatically after cancelling a SIP call
Select the event “Phone call terminated“ or “Intercom call terminated”.
Select the entry “any” in the drop-down list below the event. Thus, the event is fulfilled by any ter-
minated SIP or Intercom call.
Select the action “PIN code dialog”.
(Optional) In the field Notification dialogue message, enter the text that is shown in the PIN code
dialogue on the display.
➥ Click on Save.
To Next Page
Loading...
