Getting Started Engineering Manual
22
Selecting Menu Options
To select an engineer option:
1. Press the | or ¬ button to scroll to Engineer Menu 1 or 2, then press [ to enter that
menu. Alternatively, press hotkey 1 (for Engineer Menu 1) or hotkey 2 (for Engineer
Menu 2), then [.
2. Once you are in an Engineer menu, use the scroll keys (| or ¬) or hotkeys to select the
required option. The option may itself be a menu containing further options.
In some cases, options are available only by scrolling.
Exiting from an Option or Menu
Pressing the
]
key takes you one step back in the menu hierarchy or one step back in a
procedure (such as the procedure used by the Program Zones option described on page 24).
Note: IMPORTANT - When you return the system to user mode the control unit stores any
changes you have made. If you power down the system before returning to user mode then
the control unit will loose all the changes you made during that session.
To Next Page
Loading...
