Cooper Security M750 - Option 2-5-1-4: Editing Call-Back Numbers

Engineering Manual Engineer Menu 2-5
89
Option 2-5-1-4: Editing Call-Back Numbers
Edit Call No. 2
01694130200
01694130200
^dit Call No. 2
[
1234567890123456
1234567890123456
Downloader 4
Edit Call Nos.
01694130201
Edit Call ^o. 2
Edit Call No. 1
01594545400
[
|
e.g.
To select the call-back number:
Press or
"
"
|¬ to scroll, or
Press the hot key (1-4)
Shows current
number (if defined)
1. SELECT CALL BACK
NUMBER
2. ENTER TELEPHONE
NUMBER
[
Press to save changes and continue [
Pressing the key toggles between
deleting the digit above the cursor and
adding a comma (to indicate a pause)
r
Enter the telephone number

This option is not available for M550 and M750 panels.
This option allows you to define or edit up to four telephone numbers for communication with
a PC running the Downloader software via the on-board modem.
Using the
r key, you can insert a 4-second pause between any two digits of the telephone
number (the pause is indicated by a comma). This may be necessary if the telephone system
or exchange mis-dials using the normal dialling speed of the control panel. If a delay is
necessary, it is normally placed either before the first digit (to give time to connect to the line),
or after a first digit that is used to obtain an outside line.

ARC telephone numbers can be defined by option 2-5-2-2 (page 95)