Engineer Menu 2-2 Engineering Manual
84
Option 2-2: Specifying the Time and Date
Time and Date 2
Set Date
Current Date :-
20/01/05
[
1234567890123456
1234567890123456
Eng 2 Menu 2
Time and Date
Time and Date 1
Set Time
[
|
e.g.
To select option:
Press or
"
"
|¬
to scroll, or
Enter option hot key
Enter date or time value followed by
to save changes and continue.
[
1. SELECT TIME/DATE
OPTION
2. CHANGE DATE/
TIME
Use this option to make sure that the system date and time are correct.
The system automatically advances/retards the time by one hour at 1am GMT on the
standard summer/winter changeover dates.
1 – Set Time
The time is displayed in a 24-hour format on all keypads and is also used to time stamp
events in the system log (User option 2-9; see the Manager's Manual).
2 – Set System Date
The system date is displayed on keypads. it is also used to provide date stamps for
events in the system log.
To Next Page
Loading...
