Danfoss VACON 100 FLOW Series User Manual

3.

4.
Select Rem from favourites.
STOP
READY
I/O
Motor Nom Freq
Rem from favourites
Help
Monitor
e30bg660.10
To remove the item, push the [OK] button again.
9.3 User Levels
9.3.1 Using the User Levels Menu
Use the User level parameters to keep the personnel who are not approved from changing the parameters. Also accidental changes
in the parameters can be prevented.
When a user level is selected, the user cannot see all the parameters on the display of the control panel.
9.3.2 The User Level Parameters
Table 127: The User Level Parameters
Index
Param-
eter
Min
Max
Unit
De-
fault
ID
Description
P8.1
User
Level
1
3
1
1194
1 = Normal. All the menus are visible in the main menu.
2 = Monitoring. Only the monitoring and user level menus are visible
in the main menu.
3 = Favourites. Only the favourites and user level menus are visible in
the main menu.
4 = Monitoring & Favourites. Monitoring, favourites and user level me-
nus are visible in the main menu.
P8.2
Access
Code
0
99999
0
2362
If the value is set to be other than 0 before going to Monitoring from,
for example, Normal, the access code has to be given when going back
to Normal. This prevents personnel who are not approved from mak-
ing changes in the parameters on the control panel.
NOTE! Do not lose the access code. If the access code is lost, contact
your nearest service center or partner.
AB298035655957en-000201 / DPD01083 | 149Danfoss A/S © 2023.08
User Settings, Favourites, and User
Level Menus
VACON® 100 FLOW
Application Guide

Danfoss VACON 100 FLOW Series Specifications

General

Brand	Danfoss
Model	VACON 100 FLOW Series
Category	DC Drives
Language	English