Danfoss VACON 100 FLOW Series - Load

10.13.3.4 (ID 3626) Vibration S2 High Threshold
Location in the menu: V2.16.3.4
This monitoring value shows the warning S2 high threshold value.
10.13.3.5 (ID 3627) Vibration Alarm High Threshold
Location in the menu: V2.16.3.5
This monitoring value shows the alarm/fault high threshold value.
10.13.4 Load
10.13.4.1 (ID 3628) Load Threshold Value
Location in the menu: V2.16.4.2
This monitoring value shows the threshold value after interpolating.
10.13.4.2 (ID 3629) Load S1 High Threshold
Location in the menu: V2.16.4.3
This monitoring value shows the warning S1 high threshold value.
10.13.4.3 (ID 3630) Load S2 High Threshold
Location in the menu: V2.16.4.4
This monitoring value shows the warning S2 high threshold value.
10.13.4.4 (ID 3631) Load Alarm High Threshold
Location in the menu: V2.16.4.5
This monitoring value shows the alarm/fault high threshold value.
10.13.4.5 (ID 3632) Load S1 Low Threshold
Location in the menu: V2.16.4.6
This monitoring value shows the warning S1 low threshold value.
10.13.4.6 (ID 3633) Load S2 Low Threshold
Location in the menu: V2.16.4.7
This monitoring value shows the warning S2 low threshold value.
10.13.4.7 (ID 3634) Load Alarm Low Threshold
Location in the menu: V2.16.4.8
This monitoring value shows the alarm/fault low threshold value.
10.13.5 (ID 3619) Condition-based Monitoring Status
Location in the menu: V2.16.5
This monitoring value shows the fault status of the condition-based monitoring.
AB298035655957en-000201 / DPD01083 | 165Danfoss A/S © 2023.08
Monitoring Value Descriptions
VACON® 100 FLOW
Application Guide