Danfoss VACON 100 FLOW Series User Manual

Index
Parameter
Min
Max
Unit
Default
ID
Description
1 = Enabled
1.34.16
Autochange
0
2
1
1027
0 = Disabled
1 = Enabled (interval)
2 = Enabled (weekdays)
1.34.17
Autochanged Pump
0
1
1
1028
0 = Auxiliary Pump
1 = All Pumps
1.34.18
Autochange Interval
0.0
3000.0
h
48.0
1029
1.34.19
Autochange Days
0
127
15904
B0 = Sunday
B1 = Monday
B2 = Tuesday
B3 = Wednesday
B4 = Thursday
B5 = Friday
B6 = Saturday
1.34.20
Autochange Time of Day
00:00:00
23:59:59
Time
15905
Range: 00:00:00-23:59:59
1.34.21
Autochange: Frequency Limit
0.00
P3.3.1.2
Hz
25:00
1031
1.34.22
Autochange: Pump Limit
1
4
1030
1.34.23
Bandwidth
0
100
%
10
1097
1.34.24
Bandwidth Delay
0
3600
s
10
1098
1.34.25
Pump 1 Interlock
DigIN Slot0.1
426
OPEN = Not active
CLOSED = Active
1.34.26
Pump 2 Interlock
DigIN Slot0.1
427
See 1.34.25
1.34.27
Pump 3 Interlock
DigIN Slot0.1
428
See 1.34.25
1.34.28
Pump 4 Interlock
DigIN Slot0.1
429
See 1.34.25
1.34.29
Pump 5 Interlock
DigIN Slot0.1
430
See 1.34.25
1.34.30
Pump 6 Interlock
DigIN Slot0.1
486
See 1.34.25
1.34.31
Pump 7 Interlock
DigIN Slot0.1
487
See 1.34.25
1.34.32
Pump 8 Interlock
DigIN Slot0.1
488
See 1.34.25
3.5 Multi-pump (Multidrive) Application
Use the Multi-pump (multidrive) application in a system that has the maximum of 8 parallel speed motors with different speeds, for
example, pumps, fans or compressors. By default, the Multi-pump (Multidrive) application is configured for 3 parallel motors.
The checklist for the commissioning a Multi-pump (multidrive) system is in 11.17.1.1 Commissioning Multi-pump (Multidrive).
Each motor has a drive controls that applicable motor. The drives of the system communicate with each other by Modbus RTU com-
munication.
AB298035655957en-000201 / DPD0108344 | Danfoss A/S © 2023.08
Applications
VACON® 100 FLOW
Application Guide

Danfoss VACON 100 FLOW Series Specifications

General

Brand	Danfoss
Model	VACON 100 FLOW Series
Category	DC Drives
Language	English