Danfoss VACON 100 FLOW Series - Condition-Based Monitoring; Baseline Data

This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.6 (ID 15120) Block Out.6
Location in the menu: V2.13.7
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.7 (ID 15140) Block Out.7
Location in the menu: V2.13.8
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.8 (ID 15160) Block Out.8
Location in the menu: V2.13.9
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.9 (ID 15180) Block Out.9
Location in the menu: V2.13.10
This monitoring value shows the value of the function block output in the Drive customizer function.
10.12.10 (ID 15200) Block Out.10
Location in the menu: V2.13.11
This monitoring value shows the value of the function block output in the Drive customizer function.
10.13 Condition-based Monitoring
10.13.1 Baseline Data
10.13.1.1 (ID 3601) Baseline Data Element 1
Location in the menu: V2.16.1.1
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.2 (ID 3602) Baseline Data Element 2
Location in the menu: V2.16.1.2
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.3 (ID 3603) Baseline Data Element 3
Location in the menu: V2.16.1.3
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.4 (ID 3604) Baseline Data Element 4
Location in the menu: V2.16.1.4
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.5 (ID 3605) Baseline Data Element 5
Location in the menu: V2.16.1.5
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.6 (ID 3606) Baseline Data Element 6
Location in the menu: V2.16.1.6
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
10.13.1.7 (ID 3607) Baseline Data Element 7
Location in the menu: V2.16.1.7
This monitoring value shows the baseline data. The baseline data is selected using the baseline data selector.
AB298035655957en-000201 / DPD01083 | 163Danfoss A/S © 2023.08
Monitoring Value Descriptions
VACON® 100 FLOW
Application Guide