Danfoss VACON 100 FLOW Series - Page 223

I
100%
63%
T
t
t
A
B
e30bu061.10
Illustration 66: The Motor Thermal Time Constant
A
Current
B
Motor thermal time constant
11.11.2.5 (ID 708) Motor Thermal Loadability
Location in the menu: P3.9.2.5
Use this parameter to set the thermal loadability of the motor. For example, if the value is set to 130%, the motor goes to the nomi-
nal temperature with 130% of the motor nominal current.
AB298035655957en-000201 / DPD01083 | 223Danfoss A/S © 2023.08
Parameter Descriptions
VACON® 100 FLOW
Application Guide