Danfoss VACON 100 FLOW Series - Page 92

Index
Parameter
Min
Max
Unit
Default
ID
Description
P3.3.1.6
I/O Control Reference B Selection
1
20
4
(1)
131
See P3.3.1.5.
P3.3.1.7
Keypad Control Reference Selection
1
20
2
(1)
121
1 = Preset Frequency 0
2 = Keypad reference
3 = Fieldbus
4 = AI1
5 = AI2
6 = AI1+AI2
7 = PID reference
8 = Motor potentiometer
11 = Block Out.1
12 = Block Out.2
13 = Block Out.3
14 = Block Out.4
15 = Block Out.5
16 = Block Out.6
17 = Block Out.7
18 = Block Out.8
19 = Block Out.9
20 = Block Out.10
P3.3.1.8
Keypad Reference
0.00
P3.3.1.2
Hz
0.00
184
P3.3.1.9
Keypad Direction
0
1
0
123
0 = Forward
1 = Reverse
P3.3.1.10
Fieldbus Control Reference Selection
1
20
3
(1)
122
1 = Preset Frequency 0
2 = Keypad reference
3 = Fieldbus
4 = AI1
5 = AI2
6 = AI1+AI2
7 = PID reference
8 = Motor potentiometer
11 = Block Out.1
12 = Block Out.2
13 = Block Out.3
14 = Block Out.4
15 = Block Out.5
16 = Block Out.6
17 = Block Out.7
18 = Block Out.8
19 = Block Out.9
20 = Block Out.10
1
The selection of the application with parameter P1.2 Application gives the default value. See the default values in
11.25 Default Values of Parame-
ters in the Different Applications.
AB298035655957en-000201 / DPD0108392 | Danfoss A/S © 2023.08
Parameters Menu
VACON® 100 FLOW
Application Guide