Enter/Exit Programming Mode Aztec Code
220 Gryphon™ I GD/GBT/GM4500
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for Aztec Code Length Con-
trol on page 218
. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length
if in Fixed Length Mode. Characters can be set
from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See
page 303 for detailed instructions on setting this feature.
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left follow
ed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
Length 2 is 3,832 Characters
DEFAULT
To Next Page
Loading...
Need help?
General
