Table 49. System Setup options—Overview menu(continued)
Overview
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
MEMORY Information
Memory Installed Displays the total memory installed on the computer.
Memory Available Displays the total memory available on the computer.
Memory Speed Displays the memory speed.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Memory Channel Mode Displays single or dual channel mode.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Memory Technology Displays the technology that is used for the memory.
DEVICES Information
Panel Type Displays the type of display panel available on the computer.
Panel Revision Displays the Panel Revision of the computer.
Video Controller Displays the type of video controller available on the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays the Bluetooth device information of the computer.
LOM MAC Address Displays the LAN On Motherboard (LOM) MAC address of the system.
Pass Through MAC Address Displays the MAC address of the video pass-through.
Cellular Device Displays the cellular device of the computer.
Table 50. System Setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of the computer.
NOTE: To view this option, enable Service options as described in View
Service options.
Boot Sequence Displays the boot sequence.
Enable PXE Boot Priority Enables or disables the new PXE boot option. Allows loading an operating system
over a network connection. By default, the Enable PXE Boot Priority option is
disabled.
Secure Digital (SD) Card Boot Enables or disables read-only boot from Secure Digital (SD) card.
By default, the Secure Digital (SD) Card Boot option is disabled.
BIOS Setup 169
To Next Page
Loading...
