Dell Pro Rugged 13 - Removing the M.2 2280 Solid State Drive from the Carrier; Installing the M.2 2280 Solid State Drive into the Carrier

Removing the M.2 2280 solid state drive from the carrier
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the solid state drive carrier.
About this task
The following image indicates the location of the solid state drive and provides a visual representation of the removal procedure.
Figure 43. Removing the M.2 2280 solid state drive from the carrier
Steps
1. Flip the SSD carrier and remove the (M2x5) screw that secures the SSD carrier cover to the SSD carrier.
2. Flip the SSD carrier and pull the mylar tape to lift the SSD carrier cover.
3. Lift and remove the M.2 2280 solid state drive from the SSD carrier.
Installing the M.2 2280 solid state drive into the carrier
CAUTION: The information in this installation section is intended for authorized service technicians only.
Removing and installing Field Replaceable Units (FRUs) 77