Table 54. System Setup options—Connection menu(continued)
Connection
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Antenna Switch This setting configures, on a radio-by-radio basis, which antenna to use when
docked: docking station or system. If set to Dock antenna, the default, then the
radio will be switched to use the external docking station antenna when docked.
If set to System, the radio will continue using the internal system antenna, even
when docked. When the system is undocked, the system antennas are used and
this option has no effect.
NOTE: This setting applies to Rugged docking stations and does not apply to
USB Type-C docking stations.
NOTE: For radios having more than one antenna, the setting will apply to
both antennas.
WLAN Antenna Enable or disable the Dock Antenna or System Antenna option
By default, the Dock Antenna option is enabled.
WWAN Antenna Enable or disable the Dock Antenna or System Antenna option
By default, the Dock Antenna option is enabled.
GPS Antenna Enable or disable the Dock Antenna or System Antenna option
By default, the Dock Antenna option is enabled.
Table 55. System Setup options—Power menu
Power
Battery Configuration
Battery 1 Configuration Enables or disables the computer to run on battery during peak power usage
hours. Use the table Custom Charge Start and Custom Charge Stop, to
prevent AC power usage between certain times of each day.
By default, the Adaptive option is selected. Battery settings are adaptively
optimized based on your typical battery usage pattern.
Battery 2 Configuration Enables or disables the computer to run on battery during peak power usage
hours. Use the table Custom Charge Start and Custom Charge Stop, to
prevent AC power usage between certain times of each day.
By default, the Adaptive option is selected. Battery settings are adaptively
optimized based on your typical battery usage pattern.
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day
to a specified work period. When enabled, Advanced Battery Charged maximizes
battery health while still supporting heavy use during the work day.
By default, the Enable Advanced Battery Charge Configuration option is
disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Peak Shift
Enable Peak Shift Enables or disables the computer to run on battery during peak power usage
hours.
By default, the Enable Peak Shift option is disabled.
176 BIOS Setup
To Next Page
Loading...
